TeamForge Load Balancing Setup

• In this setup, TeamForge services have been distributed across several servers to distribute the load across several servers.
• The hardware/software requirements for running TeamForge in a load balancing setup remain the same as that of the usual setup. See [TeamForge Requirements][requirements].
• HAProxy can be installed on a server with single core CPU and at least 1GB of RAM.
• Monit is required on all servers to monitor services such as HAProxy and TeamForge applications.

HAProxy

HAProxy is one of the efficient and reliable solutions that offers load balancing services. For more information, see HAProxy Documentation.

This setup uses the HAProxy server as the termination point for all requests to the TeamForge application and its related components. The HAProxy will be configured to handle all requests to the backend servers.

The HAProxy Server is hereinafter referred to as haproxy.company.domain.com.

Domain Names

With this load balancing setup, there is no requirement to allocate additional user-facing domain names for the servers. Each service is described based on the FQDN of the server on which it runs. HAProxy will proxy the requests to the relevant back-end servers.

This HAProxy deployment model is implemented to support the scenario of federating services across multiple servers without impacting existing URLs to those services.

Configuring HAProxy

HAProxy can have its configuration generated automatically by TeamForge. CollabNet recommends deploying HAProxy as the load balancing / front-end proxy by configuring it as a TeamForge node.

In this setup:

• The TeamForge Application Server hosts the core TeamForge application service, ctfcore, and other services such as service-monitor, cliserver, reviewboard-adapter, mail, search, etl, binary, reviewboard, reviewboard-database, binary-database, ctfcore-datamart, ctfcore-database, gerrit-database, webr and webr-database.

• The HAProxy Server hosts the HAProxy services.

• Services such as subversion, gerrit, codesearch and baseline are hosted on separate servers.

• Place the license file which you intend to use (sflicense.txt) in the /opt/collabnet/teamforge/var/etc/ directory. This saves you from having to restart the servers when the license is applied at a later point in time.

  The license must be applicable to both the servers in the cluster.

• Unless self-signed certificates are acceptable, provide custom SSL certificates using the following TeamForge site-options.conf tokens:

  SSL_CERT_FILE=/etc/ssl/certs/server.crt
  SSL_KEY_FILE=/etc/ssl/certs/server.key
  
  # Optional - only needed if an intermediate cert is needed
  # SSL_CHAIN_FILE=/etc/ssl/certs/intermediate.crt

Service Monitor

TeamForge supports Monit for monitoring services and recovering failed services. Monit is installed on the TeamForge Application and HAProxy servers to monitor the health of services and restart the services when they fail.

Monit log file is located at /opt/collabnet/teamforge/log/monit/monit.log.

System Landscape

The following TeamForge site-options.conf snippet illustrates the system landscape for this setup being discussed in this topic:

################################################################################################################

#HAProxy cluster and PUBLIC_FQDN
haproxy-cluster:CLUSTER_SERVICES=haproxy-ctfcore service-monitor haproxy-stats haproxy-subversion haproxy-mail haproxy-gerrit haproxy-binary haproxy-reviewboard haproxy-webr
haproxy.company.domain.com:CLUSTER=haproxy-cluster
haproxy-cluster:PUBLIC_FQDN=hafqdn.company.domain.com
haproxy-cluster:haproxy-ctfcore:BACKEND = ctfapp.company.domain.com
haproxy-cluster:haproxy-mail:BACKEND = ctfapp.company.domain.com
haproxy-cluster:haproxy-binary:BACKEND = ctfapp.company.domain.com
<!-- haproxy-cluster:haproxy-cvs:BACKEND = ctfapp.company.domain.com -->
haproxy-cluster:haproxy-reviewboard:BACKEND = ctfapp.company.domain.com
haproxy-cluster:haproxy-subversion:BACK END = svn.company.domain.com
haproxy-cluster:haproxy-gerrit:BACKEND = gerrit.company.domain.com
haproxy-cluster:haproxy-webr:BACKEND = ctfapp.company.domain.com

###############################################################################################################

#ctfcore-cluster and PUBLIC_FQDN
ctfapp.company.domain.com:SERVICES=ctfcore service-monitor cliserver reviewboard-adapter mail search etl binary reviewboard reviewboard-database binary-database ctfcore-datamart ctfcore-database gerrit-database webr webr-database
ctfapp.company.domain.com:PUBLIC_FQDN=hafqdn.company.domain.com
ctfapp.company.domain.com:mail:PUBLIC_FQDN=hafqdn-mail.company.domain.com
ctfapp.company.domain.com:binary:PUBLIC_FQDN=hafqdn-binary.company.domain.com
ctfapp.company.domain.com:webr:PUBLIC_FQDN=hafqdn-webr.company.domain.com

################################################################################################################

#Gerrit Box
gerrit.company.domain.com:SERVICES=gerrit
gerrit.company.domain.com:PUBLIC_FQDN=hafqdn.company.domain.com
gerrit.company.domain.com:gerrit:PUBLIC_FQDN=hafqdn-gerrit.company.domain.com

#Subversion Box
svn.company.domain.com:SERVICES=subversion
svn.company.domain.com:PUBLIC_FQDN=haqatest.maa.collab.net
svn.company.domain.com:subversion:PUBLIC_FQDN=hafqdn-subversion.company.domain.com

ENABLE_SERVICE_MONITORING=true

#others
codesearch.company.domain.com:SERVICES=codesearch

baseline.company.domain.com:SERVICES=baseline baseline-database baseline-post-install

################################################################################################################

Where:

Cluster/Server	Description	Hosted Services
haproxy.company.domain.com	The HAProxy cluster	haproxy-ctfcore service-monitor haproxy-stats haproxy-subversion haproxy-mail haproxy-gerrit haproxy-binary haproxy-reviewboard haproxy-eventq haproxy-webr
ctfapp.company.domain.com	The CTF Core cluster	ctfcore service-monitor cliserver reviewboard-adapter mail search etl binary reviewboard reviewboard-database binary-database ctfcore-datamart ctfcore-database gerrit-database webr webr-database
svn.company.domain.com	The Subversion server	subversion
gerrit.company.domain.com	The Gerrit server	gerrit
codesearch.company.domain.com	The Codesearch server	codesearch
baseline.company.domain.com	The Baseline server	baseline baseline-database baseline-post-install

Install TeamForge in a Load Balancing Setup

For the distributed setup discussed earlier, the installation process has to be done in the following sequence:

1. Set up the TeamForge Application Server, provision TeamForge and copy the site-options.conf file to all other servers.
2. Set up the HAProxy Server and provision TeamForge.
3. Set up the Baseline Server, provision TeamForge and copy the site-options.conf file to all other servers.
4. Provision the TeamForge Application and HAProxy servers again.
5. Set up the Subversion Server.
6. Set up the Gerr
7. it Server.
8. Set up the Codesearch Server.

Prepare the Servers

It is assumed that you have all the servers required for TeamForge Load Balancing installation prepped up with the required OS: RHEL 8.10.

Set up the TeamForge Application Server

1. Configure the TeamForge installation repository.

1. Install the TeamForge application packages.

   yum install teamforge

2. Install the Baseline packages if you are installing TeamForge Baseline.

   yum install teamforge-baseline

3. Install Monit.

   important

   If you haven't already installed the latest version of the Monit application, download it here.

   1. Download Monit for

      • RHEL 8.x from the EPEL repository.

        wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
        rpm -ivh epel-release-latest-8.noarch.rpm

      • RHEL/CentOS 7.x from the EPEL repository.

        wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
        rpm -ivh epel-release-latest-7.noarch.rpm

   2. Install Monit.

      yum install monit

4. Modify the /etc/hosts entries and add the FQDNS, all pointing to the HAProxy server's IP address.

5. Provision services.

   teamforge provision

Copy the site-options.conf File

Once you configure the site-options.conf file in the TeamForge Application Server, you can copy it to the /opt/collabnet/teamforge/etc/ directory of all the servers.

Set up the HAProxy Server

1. Configure the TeamForge installation repository.

2. Install the TeamForge application packages.

   yum install teamforge CN-haproxy

3. Install Monit.

   important

   If you haven't already installed the latest version of the Monit application, download it here.

   1. Download Monit for

      • RHEL 8.x from the EPEL repository.

        wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
        rpm -ivh epel-release-latest-8.noarch.rpm

      • RHEL/CentOS 7.x from the EPEL repository.

        wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
        rpm -ivh epel-release-latest-7.noarch.rpm

   2. Install Monit.

      yum install monit

4. Provision services.

   teamforge provision

Set up the Baseline Server

1. Configure the TeamForge installation repository.

2. Install the TeamForge Baseline application packages.

   yum install teamforge-baseline -y

3. Modify the /etc/hosts entries and add the FQDNS, all pointing to the HAProxy server's IP address.

4. Provision services.

   teamforge provision

5. Copy the site-options.conf file from the Baseline Server to all other servers.

6. Provision the TeamForge Application and HAProxy servers again.

Set up the Subversion Server

1. Configure the TeamForge installation repository.

2. Install the TeamForge application packages.

   yum install teamforge-scm -y

3. Modify the /etc/hosts entries and add the FQDNS, all pointing to the HAProxy server's IP address.

4. Provision services.

   teamforge provision

Set up the Git Server

1. Configure the TeamForge installation repository.

2. Install the Git packages.

   yum install teamforge-git -y

3. Modify the /etc/hosts entries and add the FQDNS, all pointing to the HAProxy server's IP address.

4. Provision services.

   teamforge provision

Set up the Codesearch Server

1. Configure the TeamForge installation repository.

2. Install the TeamForge Codesearch application packages.

   yum install teamforge-codesearch -y

3. Modify the /etc/hosts entries and add the FQDNS, all pointing to the HAProxy server's IP address.

4. Provision services.

   teamforge provision

Troubleshooting

• What do I do if the HAProxy connections to https frontend reaches the maximum number of connections (which is 10000 by default)?

  Increase the number to a higher value (like HAPROXY_MAX_CONNECTIONS=15000) in the site-options.conf on the HAProxy server and provision TeamForge again. This is to buy time to identify the root cause of the real problem.

  Possible issue: Check the clients (like Gerrit, Jenkins, Nexus, etc) from the network and look out for the stale/long running connections (they may be appearing as incomplete requests) and fix/close those connections.

• How do I enable keep alive in HAProxy?

  Set HAPROXY_HTTP_MODE_OPTION=http-keep-alive in the site-options.conf in HAProxy server and provision TeamForge.