Skip to main content
Version: TeamForge 22.1

Set up TeamForge for LDAP Authentication with Auth Manager

Set up LDAP Integration for TeamForge​

Follow these steps to convert your TeamForge installation to authenticate against your corporate OpenLDAP server.

note

Refer to the Installation Requirements for TeamForge for the supported OpenLDAP versions.

  1. Stop TeamForge.

    teamforge stop
  2. Edit the site-options.conf file.
    1. Enable TeamForge to use LDAP authentication by editing the site-options.conf file, for example, edit /opt/collabnet/teamforge/etc/site-options.conf file. Under External User Authentication, uncomment the line that follows and change its value to true.
    USE_EXTERNAL_USER_AUTHENTICATION=true
    1. Configure the site-options tokens.
note

The values specified for the following tokens are only for illustration purpose.

EXTERNAL_AUTHENTICATION_TYPE=ldap
LDAP_DN_PREFIX=cn=
LDAP_DN_SUFFIX=,cn=Users,dc=testldap,dc=qa,dc=collab,dc=net
LDAP_SERVER_URL=ldap://testldap.qa.collab.net:3268

  1. Provision services.

    teamforge provision

    TeamForge 22.1 installer expects the system locale to be LANG=en_US.UTF-8. TeamForge create runtime (teamforge provision) fails otherwise.

Turn off LDAP Authentication​

During some maintenance operations, such as upgrades, you may need to turn off LDAP authentication.

  1. Open the site-options.conf file, the master configuration file that controls your TeamForge site.

    vi /opt/collabnet/teamforge/etc/site-options.conf
note

vi is an example. Any *nix text editor will work.

  1. In the site-options.conf file, comment out these variables:

    • USE_EXTERNAL_USER_AUTHENTICATION
    • LOGIN_CONFIG_XML_FILE
    • MINIMUM_PASSWORD_LENGTH

  2. Recreate the runtime environment.

    ./install.sh -V -r -d /opt/collabnet/teamforge

  3. Review the variables you have changed, then save the site-options.conf file.

Authenticate Users with LDAP Using Auth Manager​

Use the Auth Manager to effectively manage and synchronize user profiles with LDAP.

There are a few limitations to the conventional method used to enable LDAP authentication. For example, when an external authentication source is configured using the conventional method, the template XML file needs to be copied and edited manually. The manual intervention may lead to ambiguities and it makes the process error-prone.

TeamForge makes the entire external authentication process easier with the Auth Manager add-on. It provides users the ability to create multiple profiles, manage profiles, and perform LDAP synchronization.

The Auth Manager allows you to:

  • import login-config.xml file.

  • maintain multiple profiles in LDAP servers.

  • manage each profile individually.

  • activate a profile without recreating runtime.

  • store files in the Integration Data Service (IDS) that survives an upgrade.

Install Auth Manager​

The Auth Manager add-on provides customers with a central authentication service the ability to integrate TeamForge with external authentication services such as LDAP, Active Directory, and Kerberos.

The Auth Manager TeamForge add-on is available as an RPM file that you have to download and install. contact Digital.ai Support for more information.

  1. Log on to TeamForge as a root user.

  2. Extract the RPM file. Extracting creates the add-on directory at /opt/collabnet/teamforge/add-ons

  3. Navigate to the new add-ons directory.

    cd /opt/collabnet/teamforge/add-ons/ctf_authentication_manager

  4. Install the Auth Manager:

    ./install

  5. Choose to synchronize with LDAP for user data or make use of the user provided data, as required. For example, if you want to:

    • create a user profile quickly, use the data available in LDAP by enabling LDAP sync and running hide.sh script. It displays only the Re-type password field to the user.

    • create a user profile using the data provided by the user, disable LDAP and run the show.sh script. It displays all the fields that you expect the user to fill in and requires site administrator's approval. This is fairly a time-consuming process.

  6. Set up your site's master configuration file.

    vim /opt/collabnet/teamforge/etc/site-options.conf

    1. Set APPROVE_NEW_USER_ACCOUNTS token as false.

      • Hide fields - To skip the approval process and create an user profile with the data available in LDAP, you have to enable LDAP Sync and run the hide.sh script after installation. It conceals all the fields on the Create New User page except the Re-type password field.

      • Show fields - To get the data from the user and not through the LDAP sync, you have to disable LDAP Sync run the show.sh script after installation. It shows all fields including full name, email, locale string, and license type on the Create New User page.

    2. Set REQUIRE_PASSWORD_SECURITY as false.

    3. Set PASSWORD_REQUIRES_NUMBER as false.

    4. Set PASSWORD_REQUIRES_NON_ALPHANUM as false.

    5. Set USE_EXTERNAL_USER_AUTHENTICATION as true.

    6. Set REQUIRE_USER_PASSWORD_CHANGE as false.

    7. Set MINIMUM_PASSWORD_LENGTH as 0.

    8. Set PASSWORD_REQUIRES_MIXED_CASE as false.

  7. Protect Auth Manager with SSL, if preferred. Click here for more details.

  8. Provision services.

    teamforge provision

    TeamForge 22.1 installer expects the system locale to be LANG=en_US.UTF-8. TeamForge create runtime (teamforge provision) fails otherwise.

  9. Start TeamForge.

    teamforge start

    To ensure that the installation has been completed successfully and the external authentication functionality works do the following:

    Login to the TeamForge through UI as an admin user and check if the add-on is appearing as Auth Manager in the project navigation bar. Also, for fresh installation, an active Default TeamForgeDatabase profile appears under Manage Existing Profiles, by default, with the green status indicator.
    Alternatively, in the CLI, scrutinize the log files, for example, /opt/collabnet/teamforge/log/apps/server.log.

Configure Auth Manager in TeamForge​

You can configure Auth Manager as a linked application in TeamForge.

As a result of this configuration, the Auth Manager appears in TeamForge's project navigation bar as a linked application.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. Click PROJECT ADMIN from the Project Home menu.

  3. On the Project Admin Menu, click Project Toolbar. Then click LINKED APPLICATIONS. A list of all currently linked applications in the project is displayed.

  4. Click Create.

  5. On the Create Linked Application page, enter the name for the linked application as AUTH MANAGER.

  6. Enter the URL: http://<host>/authenticationManager.

  7. Enable Single Sign On (SSO) to allow TeamForge users to automatically log into the Auth Manager.

  8. Click Save. The application is linked to the TeamForge and the it appears as AUTH MANAGER in the project navigation bar.

Manage Authentication Profiles​

TeamForge utilizes its own database to validate the user name and password and also supports external authentication sources such as LDAP, Active Directory, Kerberos and Master Password.

Create a User Profile​

You can create a profile that determines the authentication method and settings in TeamForge.

You need to have at least one user profile or more in active status before configuring the external authentication.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Create Profile.

note

In the Manage Existing Profiles page, if you do not find the desired one in the list of existing authentication profiles, you can click New Profile and proceed.

  1. From the drop-down menu, select the type of the new authentication profile.

    • LDAP - It uses the user name and password provided by the user to bind to the LDAP. If the bind is successful, the user is authenticated. This is a simple method of authentication. Click here for more information.

    • LdapExtended - It uses a service account to bind to the LDAP. Customizable filters are used to bind with the user and to validate authentication. Click here for more information.

      tip

      Use this module if the users are spread over LDAP or when a group membership is required to access TeamForge.

      important

      You can use only the LdapExtended profile as a source for LDAP Sync.

    • Active Directory - It uses the user data configured through Microsoft's Active Directory. This is a simple method of authentication.

    • Kerberos - It uses MIT KRB5 authentication. Contact your network admin for the host configuration settings.

  2. Set the Jboss flag that determines the behaviour of the control flag with multiple login-modules.

    • Sufficient - The login-module is not required to succeed. If it does succeed, control immediately returns to the application (authentication does not proceed down the login-module list). If it fails, authentication continues down the login-module list.

    • Optional - The login-module is not required to succeed. If it succeeds or fails, authentication still continues to proceed down the login-module list.

    • Required - The login-module is required to succeed. If it succeeds or fails, authentication still continues to proceed down the login-module list.

  3. Enter the value for each module property listed for the chosen profile type.

  4. Click Create. The confirmation message, The authentication profiles have been imported. Activate the profiles to apply to TeamForge authentication, appears.

note

The newly created profile is listed under Authentication Profiles in the Manage Existing Profile page. It is now inactive and the status indicator is yellow. You must activate the newly created user profile.

tip

Before you create any profiles using Auth Manager, you may see an inactive auto-imported TeamForgeDatabase profile appearing under Authentication Profiles. It is recommended to delete the Auto-imported UsernamePasswordInDatabaseLoginModule after creating and activating your first profile. Because the subsequent login and authentication request pass only through the active profile(s).

Configure Master Password​

With the Site Administrative privileges, you can generate a master password and use it along with any user name registered with the TeamForge.

You can create an authentication profile for master password users in Auth Manager. Impersonation is not supported in TeamForge but the master password feature facilitates any user in TeamForge, irrespective of the roles, to login as another user if they have a valid master password.

The Site Admin needs to generate the password through scripts and configure the authentication user profile using Auth Manager. It is important to have this configured for a web-based SSO system.

  1. On the commad-line interface, login to TeamForge as a root user to generate the master password.

  2. Navigate to the new add-ons directory.

    cd /opt/collabnet/teamforge/add-ons/ctf_authentication_manager

  3. Set the master password.

    ./mpasswd.sh

  4. Enter the password and re-enter when prompted for confirmation.

note

Ensure that the password is masked while entering it. Also keep the master password confidential and share it with authenticated users on demand. It is a good practice to keep changing the master password frequently.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Create Profile.

note

In the Manage Existing Profiles page, if you do not find the desired one in the list of existing authentication profiles, you can click New Profile and proceed.

  1. On the Create Authentication Profile page, select MasterPassword from the drop-down list.

  2. Enter an appropriate name for the new MasterPassword user profile.

  3. Set the Jboss flag that determines the behaviour of the control flag with multiple login-modules.

    • Sufficient - The login-module is not required to succeed. If it does succeed, control immediately returns to the application (authentication does not proceed down the login-module list). If it fails, authentication continues down the login-module list.

    • Optional - The login-module is not required to succeed. If it succeeds or fails, authentication still continues to proceed down the login-module list.

    • Required - The login-module is required to succeed. If it succeeds or fails, authentication still continues to proceed down the login-module list.

  4. Click Create. The confirmation message, The authentication profiles have been imported. Activate the profiles to apply to TeamForge authentication, appears.

note

The newly created profile is listed under Authentication Profiles in the Manage Existing Profile page. It is now inactive and the status indicator is yellow. You must activate the newly created user profile.

tip

Before you create any profiles using Auth Manager, you may see an inactive auto-imported TeamForgeDatabase profile appearing under Authentication Profiles. It is recommended to delete the Auto-imported UsernamePasswordInDatabaseLoginModule after creating and activating your first profile. Because the subsequent login and authentication request pass only through the active profile(s).

Upgrade a Profile​

You can upgrade a legacy authentication profile by importing the corresponding configuration file for authentication.

You can upgrade an authentication profile that was used in TeamForge 6.2 or older versions. For each profile, you have to import and save the respective login-config.xml file. It imports all the user profiles automatically into the standalone.xml file which is later converted into standalone-full.xml. The login-config.xml and standalone-full.xml files are placed at the same location.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Upgrade Legacy Config.

  4. Select an option to upload your existing authentication configuration.

    1. Detected Configuration Files - The list of files detected in the default location.

    2. Specify Server-based Configuration File - Specify the location of the login-config.xml file in the TeamForge Server.

    3. Upload Existing Configuration File - Specify the legacy login-config.xml file saved in the local.

  5. Click Save. The confirmation message, The authentication profiles have been imported. Activate the profiles to apply to TeamForge authentication, appears.

note

The newly created profile is listed under Authentication Profiles in the Manage Existing Profile page. It is now inactive and the status indicator is yellow. You must activate the newly created user profile.

Reorder Profiles​

You can set the order in which a user profile needs to be considered for authentication. On the Manage Existing Profiles page, you can manually reorder the list of authentication profiles.

For example, consider LDAP server 'A' that has 100 users profiles and LDAP server 'B' with just 15 users profiles. To reduce the network traffic effectively, you may arrange authentication profiles in such a away that the authentication requests pass through 'A' first and then through 'B'. When you enable reorder option, you can manually move the profiles back and forth within the list.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Manage Existing Profiles.

  4. Click Enable Reorder. You are now able to drag and drop profiles within the list.

  5. Reorder the list as required and click Save Order.

Activate a Profile​

To pass authentication requests through a profile, you must change the status of a profile to active. The status indicator is green for active profiles in .

By default, the status of a newly created profile is inactive. A profile creation process in is considered complete when you change the status from inactive to active. Activated profiles are automatically listed in the standalone-full.xml file.

You can activate a newly created profile or an existing profile that is currently inactive. The profiles that are listed in Manage Existing Profiles page with yellow status indicators are all inactive or deactivated. You can have multiple profiles in the active status and reorder them within the list, if required.

tip

Before you create any profiles using Auth Manager, you may see an inactive auto-imported TeamForgeDatabase profile appearing under Authentication Profiles. It is recommended to delete the Auto-imported UsernamePasswordInDatabaseLoginModule after creating and activating your first profile. Because the subsequent login and authentication request pass only through the active profile(s).

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Manage Existing Profiles.

  4. To activate all the profiles listed in the Manage Existing Profiles page atonce, click Activate All.

  5. To activate a particular profile in the Manage Existing Profiles page, click the profile name that needs to be activated. The profile details are displayed.

note

Ensure that the current status of the profile is inactive and marked yellow.

  1. Click Activate.
note

This button is visible only if the current status of the profile is inactive; scroll down to see this.

  1. On the confirmation window, click OK to proceed. The profile is activated now and the status turns green.

Deactivate a Profile​

At any point in time, you can deactivate an active profile in . The status indicator is yellow for inactive profiles in .

You may decide to deactivate a profile when you encounter issues with LDAP. If you are half way through the configuration setup and you do not want the profile to be acive for user authentication, you can deactivate it. Or If you want to troubleshoot and identify if the issue encounted prevails in the particluar LDAP server, you can deactivate the authentication profile.

The profiles that are listed in Manage Existing Profiles page with yellow status indicators are all inactive or deactivated. By default, the status of a newly created profile is inactive. You can have multiple profiles in the inactive status and reorder them within the list, if required. Deactivated profiles are automatically removed from the standalone-full.xml file.

important

The deactivated profile remains in the Integrated Data Space (IDS) and you can reterive the same profile by activating it. The deactivated profile is permanently removed from the application only when it is deleted.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Manage Existing Profiles.

  4. To deactivate all the profiles listed in the Manage Existing Profiles page, click Deactivate All.

  5. To deactivate a particular profile in the Manage Existing Profiles page, click the profile name that needs to be deactivated. The profile details are displayed.

note

Ensure that the current status of the profile is active and marked green.

  1. Click Deactivate.
note

This button is visible only if the current status of the profile is active; scroll down to see this.

  1. On the confirmation window, click OK to proceed. The profile is deactivated now and the status turns yellow.

Delete a Profile​

You can delete an inactive profile from the permanently.

You can delete only deactivated profiles. If you do not want to have a profile in your authentication profile list, you need to deactivate it first and then delete it totally from the system.

important

A deactivated profile remains in the Integrated Data space (IDS) until you perform deletion. To remove it completely from the system, delete the deactivated profile.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Manage Existing Profiles.

  4. Click the profile that you want to delete. The profile details are displayed.

  5. Ensure that the current status of the profile is inactive.

note

The profile status is marked yellow if inactive.

  1. Click Delete.
note

This button is visible only if the current status of the profile is inactive.

  1. On the confirmation window, click OK to proceed. The profile has been deleted.

Configure LDAP Sync​

Perform LDAP Sync to update TeamForge with the user data available in the LDAP server. You can use an extended LDAP profile as a source for LDAP sync.

LDAP Sync, basically searches in the LDAP server for the user data configured in a login-module. Then it fetches the user data to the TeamForge and performs synchronization. You have options to selectively include login-modules for the LDAP Sync. For example, you have two LDAP accounts, out of which only one needs to be considered for LDAP sync. You need to turn off the LDAP account that you do not want to include in LDAP Sync.

The extended LDAP profile needs to have Bind DN, Bind Credentials, Base Filter, and Base DN values for the synchronization. The Base DN, which is not available in other simple LDAP authentications, makes the synchronization possible in ExtendedLDAP profile.

important

Provide the site admin user name and obfuscated site admin password explicitly in /opt/collabnet/teamforge/var/etc/soap-provider.properties and do not provide ADMIN account credentials.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click Manage Existing Profiles.

  4. Select your desired profile that needs to have the LDAP Sync enabled.

  5. Click Edit.

  6. Select true from the Use As LDAP Sync Source drop-down list to consider the selected profile for the synchronization.

  7. From the Main Menu pane on the left, click LDAP Sync.

  8. Click Global Settings and enable LDAP sync by selecting true from the drop-down list.

  9. Click Group Sync Settings and do the following to synchronize groups:

    1. Select true form the Enable Group Sync drop-down list to enable the LDAP/AD group synchronization.

    2. Enter appropriate value in Group Job Cron Interval to set the time interval for running group synchronization. For example, click here.

    3. Enter the attribute in Group Search Filter Expression, to specify LDAP/AD expression for testing.

    4. Enter the search text with '*' at the end in Group Search Filter Arguments to synchronize with groups within the search results that have a particular prefix.

    tip

    To include all the groups in synchronization, just enter '*'.

    Example: CTF*, TF* or *

  10. Click User and User Data Sync Settings and do the following to synchronize user status and attributes:

    1. Select true form the Enable User Data Sync drop-down list to enable synchronization of user data.

    2. Enter appropriate value in the User Data Sync Cron Interval to set the time interval for group synchronizations. For examples, click here.

    3. Enter the search text with '*' at the beginning in User Search Filter Arguments to synchronize with groups within the search results that have a particular prefix.

      tip

      To include all the groups in synchronization, just enter '*'.

      Example: CTF*, TF* or *

    4. Select true from the Enable LDAP Status Sync drop-down. It enables the LDAP Sync for the user status. If the user account is disabled in LDAP/AD, it flags and then disables the user account in TeamForge.

    5. Enter the number of days in User Grace Period beyond which the user account is disabled in TeamForge, if the user is not existing in LDAP.

    6. Select false from the Enable User Disable Action drop-down list. It specifies if the user who has not logged into TeamForge for the specified period, needs to be disabled in TeamForge.

    7. Enter the number of days in User Disable Interval (Days) beyond which the user account is disabled in TeamForge, if the user has not logged into TeamForge for the specified period.

    8. Select true from the Enable User Delete Action drop-down list to enable the deletion of a disabled user account based on the delete interval.

    9. Enter the number of days in the User Delete Interval (Days) drop-down list beyond which the user account is deleted from TeamForge. It is mandatory to have Enable LDAP Status Sync or Enable User Disable Action enabled.

      • When Enable LDAP Status Sync is true, users that do not exist in Active Directory are deleted after the 'delete' and 'grace' intervals from the flagged date. However, users that are existing in Active Directory cannot be disabled or deleted.

      • When Enable User Disable Action is true, users are deleted, irrespective of their existence in Active Directory, after the 'disable' and 'delete' intervals. It is calculated from the last login date.

      • When both Enable LDAP Status Sync and Enable User Disable Action are set to true, users that are not existing in Active Directory are deleted after the 'grace' and 'delete' intervals from the flagged date. And the users that are existing in the Active Directory are deleted after the 'disable' and 'delete' intervals from the last login date.

    10. Select true from the Enable User Membership Action drop-down list to include user's LDAP/AD group membership in the synchronization. This needs to be enabled when the Enable Group Sync is set to true.

    11. Select true from the Allow User Re-enabling drop-down list to re-enable LDAP active users that have pending or disabled status in TeamForge.

    12. Enter the user names in Excluded Usernames to skip the respective users accounts during synchronization.

    13. Enter the email address in Default Email Address that needs to be associated with the TeamForge user account. It is used as the default email address when the email field is found null or empty.

    14. Enter the number of user batches in Split Users for LDAP Sync to perform the synchronization.

    note

    The user batch number entered splits the existing number of users into batches and then performs synchronization. Entering '0' or '1' considers all the existing users for the synchronization. Whereas entering '7' splits the existing users into seven batches and completes synchronization on the seventh run.

  11. Click to expand Mail and Reporting Settings and do the following:

    1. Select true in Enable User Email Reports drop-down list to enable the email notification and reporting.

    2. Enter the SMTP host to mail through. If you are using the TeamForge James mail server, enter localhost in Mail Transport Host.

    3. Enter the email address of the recipient in Mail To that is usually a TeamForge Discussion Forum or a Tracker.

    4. Enter the email address of the sender in Mail From that is usually a TeamForge Discussion Forum or Tracker. The sender should be a valid TeamForge user.

    5. Enter any optional email address in Mail CC that needs a carbon copy of the email.

    6. Enter the subject line for the email in Mail Subject.

    7. Enter the user name in Mail Username that authenticates connection to the SMTP servers, if required. Its optional to fill in this field.

    8. Enter the password in Mail Password that is required to connect to SMTP servers, if required. Its optional to fill in this field.

  12. To save and apply all the changes you made to the profile, click Save.

  13. To run the LDAP Sync once (on an ad hoc basis), click Run Once.

  14. Click Stop and Start buttons to reinitiate the synchronization service.

Configure Selective Sync​

The Selective sync, otherwise known as single user sync, is similar to the LDAP sync that is performed only for a particular user and not for the users in the entire directory server. The Site Admin can perform synchronization for a selective user on the three selective attributes: full name, email, and organization.

The single user sync is helpful when you encounter inconsistencies or discrepancies in the LDAP behaviour. Some of the common scenarios include network delay, LDAP disconnectivity, and failure of authenticating a valid user.

In cases where the LDAP is not completely reliable, you can consider performing selective sync. For example:

  • While performing LDAP sync for a huge site that has thousands of users, there are chances that a handful of users are not synchronized and found missing in the report. Just for users that are missed out, you can synchronize the full name, email, and organization of individual users.

  • When the default (dummy) email is used to create a profile, the user may not receive any email notifications. In this case, the Site Admin can update only the email address of the user and perform single user sync. It saves the time spent on LDAP sync that scans through the entire directory server for a single user's email update.

    note

    You cannot perform selective sync on users that are disabled and deleted. Single user sync is not applicable for the 'ADMIN' user.

  1. Log on to the TeamForge as a site administrator and go to the look project.

  2. From the project navigation bar, click AUTH MANAGER.

  3. From the Main Menu pane on the left, click LDAP Sync.

  4. Select true form the Enable Group Sync drop-down list under Global Settings > Group Sync Settings. It enables the LDAP/AD group synchronization.

  5. Select true form the Enable User Data Sync drop-down list under Global Settings > User and User Data Sync Settings. It enables synchronization of the user data.

  6. To save and apply all the changes you made to the profile, click Save.

  7. Go to My Workspace > Admin.

  8. On the site administration navigation bar, click USERS.

  9. On the USERS tab, click the name of the user whose account you want to edit.

  10. On the User Details page, click EDIT.

  11. On the Edit User Information page, make your changes to the full name of the user, email address and organization.

  12. Click Sync User Info to synchronize the modified user data with the authentication source.

    important

    Selective Sync is limited to full name, email, and organization of the user. If you have issues with other attributes of a user profile, try LDAP sync through Auth Manager.

Uninstall Auth Manager​

You can remove the Auth Manager completely from the TeamForge. Unlike other linked applications in TeamForge, you need not run the default installer to uninstall the athis add-on.

Before uninstaling, use the Auth Manager GUI to remove all the authentication profiles except the TeamForgeDatabase profile.

  1. Login to TeamForge as a root user.

  2. Navigate to the new add-ons directory.

    cd /opt/collabnet/teamforge/add-ons/ctf_authentication_manager

  3. Uninstall the AUTH MANAGER.

    ./uninstall.sh

  4. Provision services.

    teamforge provision

    TeamForge 22.1 installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

  5. Start TeamForge.

    teamforge start

Field Description for Auth Manager​

The credential store and identity manager properties that are required to create an authentication profile in the Auth Manager are described here.

FieldDescription
allowEmptyPasswordsA flag indicating if empty (length 0) passwords should be passed to the LDAP server. An empty password is treated as an anonymous login by some LDAP servers and this may not be a desirable feature. Set this to false to reject empty passwords or true to have the LDAP server validate the empty password. The default is true.
baseCtxDNIt defines the fixed DN of the context to search for user roles. Consider that this is not the Distinguished Name of where the actual roles are located but the DN of where the objects containing the user roles are located (that is, for active directory, this is the DN with the user account).
baseFilterIt defines the search filter used to locate the context of the user to authenticate. The input username/userDN as obtained from the login module callback substitutes the 0 expression. This substitution behavior comes from the standard DirContext?.search(Name, String, Object[], SearchControls? cons) method. An common example search filter is "(uid=0)."
bindCredentialIt defines the bindDN password. The password can be encrypted if the jaasSecurityDomain is specified.
bindDNIt defines the DN used to bind to the LDAP server. This is a DN with read/search permissions to the defined baseCtxDN and rolesCtxDN.
java.naming.factory.initialThe classname of the InitialContextFactory implementation. This defaults to the Sun LDAP provider implementation com.sun.jndi.ldap.LdapCtxFactory.
java.naming.provider.urlThis property specifies the host name and port of the DNS server used by the initial DNS context, as well the initial context's domain name.
java.naming.referralIt indicates the service providers how to handle referrals.
java.naming.security.authenticationSpecifies the authentication mechanism and the security level to use. This defaults to simple.
java.security.krb5.kdcIt defines the host name on which the Active Directory server runs.
java.security.krb5.realmIt defines the Microsoft domain in which the Active Directory server runs.
principalDNPrefixA prefix to add to the username to form the user distinguished name.
principalDNSuffixA suffix to add to the username when forming the user distinguished name. This is useful if you prompt a user for a username and you don't want the user to have to enter the fully distinguished name.
roleAttributeIDIt defines the role attribute of the context that corresponds to the name of the role. If the roleAttributeIsDN property is set to true, this property is the DN of the context to query for the roleNameAttributeID attribute. If the roleAttributeIsDN property is set to false, this property is the attribute name of the role name.
roleAttributeIsDNIt defines if the role attribute contains the fully distinguished name of a role object or the role name. If false, the role name is taken from the value of the user's role attribute. If true, the role attribute represents the distinguished name of a role object. The role name is taken from the value of the roleNameAttributeId attribute of the corresponding object. In certain directory schemas (for example, Microsoft Active Directory), role (group)attributes in the user object are stored as DNs to role objects and not as simple names. In such case, set this property to true. The default value of this property is false.
roleFilterIt defines a search filter used to locate the roles associated with the authenticated user. The input username/userDN as obtained from the login module callback substitutes the 0 expression in the filter definition. The authenticated userDN substitutes the 1 in the filter definition. An example search filter that matches the input username is (member=0). An alternative that matches the authenticated userDN is (member=1). If you omit the roleFilter attribute, the role search will use the UserDN as the DN to obtain the roleAttributeID value.
roleNameAttributeID It defines the role attribute of the context which corresponds to the name of the role. If the roleAttributeIsDN property is set to true, this property is used to find the name attribute of the role object. If the roleAttributeIsDN property is set to false, this property is ignored.
rolesCtxDNThe fixed DN of the context to search for user roles. Consider that this is not the Distinguished Name of where the actual roles are; rather, this is the DN of where the objects containing the user roles are (e.g. for active directory, this is the DN where the user account is).
searchScope

Sets the search scope to one of the following (the default value is SUBTREE_SCOPE):

  • OBJECT_SCOPE - searches the named roles context only.
  • ONELEVEL_SCOPE - searches directly in the named roles context.
  • SUBTREE_SCOPE - searches only the object if the role context is not a DirContext?. If the roles context is a DirContext?, the subtree rooted at the named object and the named object itself are searched.
searchTimeLimitIt defines the timeout for the user and role searches in milliseconds (defaults to 10000, that is 10 seconds).