Skip to main content
Version: Deploy 22.1

Migrate Deploy Data Storage to an SQL Database

When you upgrade to Deploy 8.0.x from an earlier version, the data stored in Deploy must be converted from the JackRabbit (JCR) format to SQL format.

Deploy stores data and user-supplied artifacts such as scripts and deployment packages (jar and war files) in the database on the file system or on a database server. Deploy can use one of these options at any given time only, so you must configure the database correctly before using Deploy in a production setting. The setting can be configured in the XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml file.

Important:

From Deploy 10.2, the xl-deploy.conf file is no longer available. The configuration from xl-deploy.conf file is moved the XL_DEPLOY_SERVER_HOME/centralConfigurationdirectory as separate .yaml files. For more information about the configuration parameters, see Deploy Properties.

Database overview​

By default, Deploy uses an internal database that stores data on the file system. This configuration is intended for temporary use and is not recommended for production use.

Database permissions​

When you upgrade Deploy to a new version, Deploy creates and maintains the database schema. The database administrator requires full permissions on the database.

Table definitions​

Table definitions in Deploy use limited column sizes. You must configure this for all supported databases to prevent these limits from restricting users in how they can use Deploy.

For example, the ID of a configuration item (CI) is a path-like structure that consists of the concatenation of the names of all parent folders for the CI. A restriction is set on the length of this combined structure. For most Relational Database Management Systems (RDBMSes), the maximum length is 2000. For MySQL and MS SQL Server, the maximum length is 1024.

note

For MySQL, Deploy requires the Barracuda file format for InnoDB. This is the default format in MySQL 5.7 or later and can be configured in earlier versions.

Repository and reporting database connections​

In the XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml file, you can configure Deploy to use different database connections:

  • One for primary Deploy data (under the repository key)
  • One for the task archive (under the reporting key)

The default configuration for the repository database connection is also used for the reporting connection.

Note: From Deploy 10.2, the xl-deploy.conf file is no longer available. The configuration from xl-deploy.conf file is moved the XL_DEPLOY_SERVER_HOME/centralConfigurationdirectory as separate .yaml files. For more information about the configuration parameters, see Deploy Properties.

Supported migration scenarios​

This sections describes migration scenarios to versions 8.0.x and 8.1.x. For moving artifacts in later versions, see Move artifacts from the file system to a database.

Depending on your data storage configuration in Deploy pre 8.0.0 version, there are two supported migration scenarios:

  • The user-supplied artifacts are stored in a folder in the JCR repository. This is the default configuration. If you are trying to migrate to an SQL database, the structure must be maintained. The migrated artifacts must be stored on the file system.
    1. Configure the settings for the artifacts in the XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml file.
    2. Specify the type of artifact storage to use. Use the specified file system location for storing artifacts -file.
    3. Set the location for artifact storage on the file system: 
      xl.repository:
      artifacts:
          type: file
    The repository will be stored in an external SQL database.

  • Deploy has a custom configuration to store the JCR repository in an external database. If you want to migrate to an SQL database, the structure must be maintained. The migrated artifacts must be stored in an external SQL database.

    1. Configure the settings for the artifacts in the XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml file.
    2. Specify the type of artifact storage to use as db, and use the database for storing artifacts.
    3. Set the location for the artifacts to be stored in the database. 
      artifacts:
       type: db

Unsupported migration scenarios​

  • The migration from a JCR setup where the artifacts are stored in a separate folder on the file system to a configuration where the artifacts are stored on an external SQL database server is not supported.
  • The migration to SQL from a custom setup where the artifacts are stored in the JCR repository on an external database to a configuration where the artifacts are stored in the file system is not supported.

Requirements​

To migrate Deploy data storage to an SQL database, you must:

  • Configure a database connection in the XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml file. If you do not provide a custom database configuration in deploy-repository.yaml, Deploy uses the default configuration.

Note: From Deploy 10.2, the xl-deploy.conf file is no longer available. The configuration from xl-deploy.conf file is moved to the XL_DEPLOY_SERVER_HOME/centralConfigurationdirectory as separate .yaml files. For more information about the configuration parameters, see Deploy Properties.

  • Place a JDBC jar library that is compatible with your selected database in the XL_DEPLOY_SERVER_HOME/lib folder.

Upgrade to Deploy 8.0.0 or later​

Important: If your Deploy version is older than Deploy 8.0, you need to first migrate to any version between Deploy 8.0 and Deploy 10.0 before you can migrate to Deploy 10.1 and later versions.

The upgrade process has two stages:

  1. During the upgrade, basic data (metadata, security related data, and CI data) is migrated to SQL format. This stage must be completed successfully before you can use Deploy.

    Note: As of version 8.0.1, the migration process can be restarted during this first stage. If the process stops due to any issue, the migration can be restarted and it will continue from where it stopped. You are not required to perform a manual clean up of the partially migrated data. For example, when a database error occurs because a property value could not be written, the migration does not fail. The failed property is logged and you can manually handle the value later.

  2. During normal operation of Deploy, CI change history data, which is primary used to compare CIs, is migrated to the SQL format. This operation is executed slowly, in small batches, to minimize the impact on the performance of Deploy. During the migration, CI change history data will become available to the system. Functionality that relies on CI change history data will not be able to access that data until the migration is complete, all other functionality will operate normally.

Upgrade instructions​

The upgrade process first applies required upgraders to the JCR repository, and then migrates data from JCR to SQL format. If you have not already migrated archived tasks as part of the upgrade to Deploy 7.5.x, that migration will also run during the upgrade process.

Important: Before you upgrade to a new version of Deploy, create a backup of your repository. For more information, see Back up Deploy.

To perform the upgrade:

  1. Follow the normal upgrade procedure as far as step 13. Do not start the Deploy server.

  2. Download the Deploy JCR-to-SQL Migrator (xl-deploy-x.x.x-jcr-to-sql-migrator.zip) from the Deploy/Release Software Distribution site. Note: Login to the Deploy/Release Software Distribution site requires customer login.

  3. Extract the Migrator ZIP file into the Deploy installation folder, so that its directories are merged with those of the Deploy installation. For example:

    cd xl-deploy-8.0.0-server
    unzip ~/Downloads/xl-deploy-8.0.0-jcr-to-sql-migrator.zip

  4. Ensure that the settings used to configure the JCR repository in the previous installation are copied to the new installation, and that there are no changes in how JCR is configured. After the data is completely migrated the JCR configuration will no longer be used.

  5. Ensure that the database connections are configured correctly in XL_DEPLOY_SERVER_HOME/centralConfiguration/deploy-repository.yaml. We recommended that you use a different database or user, possibly on the same database instance, for the new SQL storage.

  6. Follow the normal upgrade procedure, as described in upgrade procedure, from step 14.

Configuration options​

You can add these options to your configuration file:

xl.migration.ci.stateFile =
xl.migration.ci.errorLogLocation =

Use the stateFile property to specify a file where to record the state of the migration. The process must have write access to the file. The file size depends on the size of the repository that is being migrated. The size will be approximately 80 bytes per CI that is migrated.

The errorLogLocation property must be a folder where the process can write data on CIs that were not be migrated successfully. The process must have write access to the folder. It will attempt to create the folder if it does not exist.

Monitoring progress during stage 1​

During the migration, progress will be reported on the command line and in the log file. This is an example of the command-line logging from stage 1:

...
2018-03-12 10:26:10.576 [main] {} WARN  c.x.deployit.upgrade.Upgrader - Ensure that you're running in 'interactive' mode and look at your console to continue the upgrade process.
2018-03-12 10:26:10.576 [main] {} INFO  c.x.deployit.upgrade.Upgrader - Upgraders need to be run, asking user to confirm.

*** WARNING ***
We detected that we need to upgrade your repository
Before continuing we suggest you backup your repository in case the upgrade fails.
Please ensure you have 'INFO' level logging configured.
Please enter 'yes' if you want to continue [no]: yes
2018-03-12 10:26:14.569 [main] {} INFO  c.x.deployit.upgrade.Upgrader - User response was: yes
2018-03-12 10:26:14.572 [main] {} INFO  c.x.deployit.upgrade.Upgrader - Upgrading to version [deployit 7.5.0]
2018-03-12 10:26:14.706 [main] {} INFO  c.x.deployit.upgrade.Upgrader - Upgrading to version [deployit 8.0.0]
2018-03-12 10:26:14.707 [main] {} INFO  c.x.d.c.u.Deployit800CiMigrationUpgrader - Found migration of CI data. Asking user confirmation.

*** WARNING ***
This upgrade will migrate the CI data from the previous repository format (JCR) to the new repository format (SQL).
The target database is configured to be jdbc:derby:repository/db;create=true.
Some parts of this database (TableName(XLD_CIS) and TableName(XL_USERS)) tables will be cleared before migration.
Please enter 'yes' if you want to continue [no]: yes
2018-03-12 10:26:18.298 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Starting CI Migration.
2018-03-12 10:26:18.298 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Deleting CIs and Users.
2018-03-12 10:26:18.455 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Migrating metadata.
2018-03-12 10:26:18.458 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Migrating version info.
2018-03-12 10:26:18.521 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Migrating security info.
2018-03-12 10:26:18.803 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Migrating CIs.
2018-03-12 10:26:19.624 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Running migration phase: create CI records on 2309 nodes in batches of 1000.
2018-03-12 10:26:20.115 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 1 / total: 3.
2018-03-12 10:26:20.413 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 2 / total: 3.
2018-03-12 10:26:20.565 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 3 / total: 3.
2018-03-12 10:26:20.689 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Running migration phase: process properties on 2309 nodes in batches of 1000.
2018-03-12 10:26:20.914 [main] {} INFO  c.x.deployit.util.JavaCryptoUtils - BouncyCastle already registered as a JCE provider
2018-03-12 10:26:22.424 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 1 / total: 3.
2018-03-12 10:26:23.603 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 2 / total: 3.
2018-03-12 10:26:24.003 [main] {} INFO  c.x.d.migration.CiJcrToSqlMigrator - Completed batch 3 / total: 3.
2018-03-12 10:26:24.068 [main] {} INFO  c.x.d.migration.MoveFilesInterceptor - Migrating artifacts from file system. Moving from /Users/mwinkels/8.0.0/xl-deploy-8.0.0-SNAPSHOT-server/repository/repository/datastore to repository/repository/datastore.
2018-03-12 10:26:24.083 [main] {} INFO  c.x.d.migration.MoveFilesInterceptor - Migrated artifacts.
2018-03-12 10:26:24.083 [main] {} INFO  c.x.d.migration.JcrToSqlMigrator - Done.
2018-03-12 10:26:27.332 [task-sys-akka.actor.default-dispatcher-3] {} INFO  akka.event.slf4j.Slf4jLogger - Slf4jLogger started
...

The log file will contain more detailed logging, such as logging for data that is based on types that are no longer available in the type system.

Monitoring progress during stage 2​

During stage 2, you can monitor progress using a JMX client such as JConsole, JVisualVM, or JmxTerm (a command-line JMX client).

The following JMX beans are available:

  • com.xebialabs.xldeploy.migration:name=HistoryMigrationStatistics: This bean can be used to track the progress on the migration of change history. The properties on the bean show 4 different counts for the items to migrate:

    • ToProcess: The number of items remaining to process.
    • Processed: The number of items successfully processed.
    • InError: The number of items that failed during migration. More detailed information on the failure can be found in the log file.
    • Ignored: The number of items that were ignored. Items under the Applications root in the system or that are of a type for which versioning is switched off will be ignored.

    The process is complete when the number of items in ToProcess reaches 0.

  • com.xebialabs.xldeploy.migration:name=HistoryMigrationManager: This bean can be used to manage the process. The reset operations will reset the migration flag on the items, including all items or only the items in InError, in the JCR repository, to make them eligible for re-processing. The restart migration operation will restart the process. These operations can only be applied when the migration process is not running.

  • com.xebialabs.xldeploy.migration:name=ArchiveMigrationStatistics: This bean shows counts on the migration status of items in the task archive. The process is complete when the number of items in ToProcess and the number of items in Migrated reach 0.

Removing the Migrator after database migration​

After migration is complete you can remove the Deploy JCR-to-SQL Migrator from the server.

To remove it:

  1. Shut down Deploy.
  2. Run the XL_DEPLOY_SERVER_HOME/bin/uninstall-jcr-to-sql-migrator.sh or XL_DEPLOY_SERVER_HOME/bin/uninstall-jcr-to-sql-migrator.cmd script. This will remove the Migrator.
  3. Restart Deploy.

If the system does not start correctly at this stage, contact Digital.ai Support. The issue may be caused by a plugin that depends on the JCR packages. You can add these packages to the server by reinstalling the Migrator. The server will start, but it is likely that the plugin that caused the issue will not work correctly.

Removing data after migration​

Remove configuration files​

  • Remove the files in the configured errorLogLocation if they exist. Carefully inspect the files to see if there were any problems during migration that should be fixed manually.
  • Remove the migration state file: migration.dat.

Remove the remaining JCR data​

After you remove the Deploy JCR-to-SQL Migrator, some data will remain in JCR format. Deploy does not use this data. You can rename all resources and start Deploy to test that it works before removing the resources.

Depending on the configuration of your server, you can remove this data using different methods:

  • If you were using an internal database, you can delete the JCR repository from the file system. In the default Deploy configuration, this includes everything in the XL_DEPLOY_SERVER_HOME/repository directory except the database and artifacts folders.
  • If you were using an external database, you can completely remove this database. You can drop the JCR tables, depending on your RDBMS and configuration. If the new system is using the same schema, make sure you do not drop the tables of the new SQL implementation. These tables are: DATABASECHANGELOG, DATABASECHANGELOGLOCK, PERSISTENT_LOGINS and all tables starting with XL_ or XLD_.
  • If the artifacts were stored on disk in the JCR implementation, these files will be moved or copied to the new location during the migration. The old files, if they exist, can be removed.

It is not required that you delete the data after removing the migrator software. It will not impact the performance of Deploy.